Can be worn on a belt or on a neck cord. Unique 100 or 1000 metre operating range using the approved and safe social alarm frequency. Up to 12 areas (or individuals) can be monitored on one Vibrating Pager. Includes rechargeable battery which can last up to 4 days in normal use, with low battery warning. Care Charger M08819 sold separately - see below.


Dimensions:
W80 x H60 x D20mm (3 x 2 1/3 x ¾")

When the Care Call Vibrating Pager Unit (M08807, sold separately) is placed into this bedside Care Call Pager Charger, the Charger unit will give an audible alert when alarms are triggered. Mains powered.


Dimensions:
W120 x H30 x D120mm (4 ¾ x 1 x 4 ¾")

Automatic alert in the event of a fall. Worn as a pendant with an inbuilt sensor that detects the change in G-force that occurs when a person falls. When such a change is picked up, the carer with the Care Call Vibrating Pager will be alerted within a 100 - 1000m radius. The pendant also features a simple press button that will signal the carer. 6V battery included with low battery indicator.


Dimensions:
42 x 75 x 18mm (1 ½ x 3 x 1/3")

Emergency pendant alarm with neck cord. A simple press of the button will signal the carer within a 100-1000m radius. 6V battery included with low battery indicator.


Dimensions:
42 x 75 x 18mm (1 ½ x 3 x 1/3")

Simply place the pressure pad and connected transmitter under a seat cushion. A signal is sent automatically to the Care Call Vibrating Pager each time the person rises from the chair. Requires a 9V PP3 battery (not included) with low battery indicator.


Dimensions:
Chair Pad: 330 x 260mm (13 x 10")
Transmitter: 40 x 80 x 30mm (1 ½ x 3 x 1")

Simply place the monitor on the doorframe and the magnet on the door. A signal is sent automatically each time the door is opened. Units can be attached to more than one door for zone monitoring. Features low battery indicator and auto battery power test feature. Fixing screws also included. Requires 9V PP3 battery (not included).


Dimensions:
Monitor: 40 x 80 x 30mm (1 ½ x 3 x 1")
Magnet: 10 x 55 x 15mm (2/5 x 2 x ½")

Simply locate the Movement Monitor on a wall close to a mains socket. Use the sensor pivot to direct the movement sensor to the area you wish to cover. Monitor may be located either in a hallway close to a staircase, at the threshold of a room or low down at a bedside and used as a bed leaving alarm. Operated by mains adaptor (included).


Dimensions:
W95 x H210 x D65mm (3 ¾ x 8 ¼ x 2 ½")

The Care Call Signwave is a portable flasher sounder that can be placed any where in the home. When any Care Call alarm (Fall Detector M08820, Pendant M09198, Chair Leaving Monitor M08832, Magnetic Door Monitor M08844, Movement Monitor M08856, Under Carpet Pressure Pad M31749) has been activated, the Signwave will emit a corresponding sound to alert the carer of the type of alarm. The strobe light and indicator lights will also flash on the event display. Volume control to adjust the noise level with normal frequency or high
frequency sounder settings. Comes complete with charging base unit. Similar to the Care Call Vibrating Pager (M08807) the operating range is 100m or can be increased to 1000m if required.


Dimensions:
W70 x H140 x D50mm (2 ¾ x 5 ½ x 2")

The Care Call Under Carpet Pressure Pad Monitor is placed under a carpet or rug at the side of a bed or in a doorway to alert a carer when someone attempts to depart from a bed or a doorway. When stepped on, it will send a signal to the Care Call Pager and Care Call Signwave alerting the carer which pressure pad was activated. Floor mat is made of heavy-duty soft vinyl. Requires 1 x 9V PP3 battery (not included).


Dimensions:
Pressure Pad: W710 x L390mm (28 x 15")
Transmitter: W40 x H80 x D30 (1 ½ x 3 x 1")

The kit is designed to assist healthcare professionals to become familiar with a carer alerting telecare system. Providing demonstration assessment without the awkward need to carry around lots of separate products. The kit contains Care Call sensors and receivers in a sturdy but lightweight carrycase. Batteries required are included in the case.

Kit Includes:
1 x Care Call Signwave
1 x Care Call Vibrating Pager
1 x Care Call Pager Charger
1 x Care Call Pendant
1 x Care Call
Chair Leaving Monitor with Transmitter.


Dimensions:
Case: W440 x H380 x D140mm (17 1/3 x 15 x 5 ½")